MINERAL OIL-BASED GREASE / FOR BEARINGS / HIGH LOAD CAPACITY / EXTREME PRESSURE LGWA 2

SKF MAINTENANCE AND LUBRICATION PRODUCTS SKF LGWA 2

High load, extreme pressure, wide temperature range grease

The Bearing Grease SKF LGWA 2 Tags:
LGWA 2 Type:mineral oil-based;
LGWA 2 Product applications:for bearings;
LGWA 2 Operating temperature:
Min.: -30°C(-22 °F)
Max.: 140 °C (284 °F)
Email:  
Add To Cart SKYPE
SKF LGWA 2 Data
SKF LGWA 2 is a premium quality mineral oil based, lithium complex grease with extreme pressure (EP) performance. LGWA 2 is recommended for general industrial and automotive applications, when loads or temperatures exceed the range of general purpose greases.
  • Excellent lubrication at peak temperatures up to 220 °C (430 °F) for short periods
  • Protection of wheel bearings operating under severe conditions
  • Effective lubrication in wet conditions
  • Good water and corrosion resistance
  • Excellent lubrication under high loads and low speeds
Typical applications:
  • Wheel bearings in cars, trailers and trucks
  • Washing machines
  • Fan and electric motors
Available pack sizes
Packsize Designation
200 g tube LGWA 2/0.2
420 ml cartridge LGWA 2/0.4
1 kg can LGWA 2/1
5 kg can LGWA 2/5
18 kg pail LGWA 2/18
50 kg drum LGWA 2/50
180 kg drum LGWA 2/180
Gas driven lubricators  
LAGD series 60 ml LAGD 60/WA2
LAGD series 125 ml LAGD 125/WA2
Electro-mechanical lubricators  
TLSD series 125 ml TLSD 125/WA2
TLSD series 125 ml refill LGWA 2/SD125
TLSD series 250 ml TLSD 250/WA2
TLSD series 250 ml refill LGWA 2/SD250
Electro-mechanical lubricant dispensers  
TLMR 101 series 120 ml refill (incl. battery) LGWA 2/MR120B
TLMR 201 series 120 ml refill LGWA 2/MR120
TLMR 101 series 380 ml refill (incl. battery) LGWA 2/MR380B
TLMR 201 series 380 ml refill LGWA 2/MR380
Technical data
Designation LGWA 2/(pack size)
DIN 51825 code KP2N-30
NLGI consistency class 2
Thickener Lithium complex
Colour Amber
Base oil type Mineral
Operating temperature range –30 to +140 °C
(–20 to +285 °F)
Dropping point DIN ISO 2176 >250 °C (>480 °F)
Base oil viscosity  
40 °C, mm²/s
100 °C, mm²/s
185
15
Penetration DIN ISO 2137  
60 strokes, 10–¹ mm
100 000 strokes, 10–¹ mm
265–295
+50 max. (325 max.)
Mechanical stability  
Roll stability, 50 hrs at 80 °C, 10–¹ mm
V2F test
+50 max. change
'M'
Corrosion protection  
Emcor:
– standard ISO 11007
– water washout test
0–0
0–0*
Water resistance  
DIN 51 807/1, 3 hrs at 90 °C 1 max.
Oil separation  
DIN 51 817, 7 days at 40 °C, static, % 1–5
Lubrication ability  
R2F, running test B at 120 °C Pass at 100 °C (210 °F)
Copper corrosion  
DIN 51 811 2 max. at 100 °C (210 °F)
EP performance  
Wear scar DIN 51350/5, 1 400 N, mm
4–ball test, welding load DIN 51350/4, N
1,6 max.
2 600 min.
* Typical value